Nature Stone® Disclosure
Nature Stone® is a blend of natural stone and specially formulated epoxy designed to be applied as a resurfacing/flooring material over an existing, structurally sound, concrete substrate. The substrate condition is critical to a successful Nature Stone® application, as any shifting, heaving, settling, cracking or deterioration of the substrate can result in damage to your Nature Stone®. Nature Stone® is a porous product allowing dampness/moisture to breathe through and is not intended as a waterproofing product. Nature Stone® will not redirect water to run off. The thickness of Nature Stone® can be adjusted and can be useful in correcting uneven substrate surfaces, however, Nature Stone® is not intended as a leveling product and unless specifically noted Nature Stone® is applied an average of ½" to ¾" in thickness, following the contour of the existing substrate. The Nature Stone® application may require all adjacent doors, including garage doors, to be adjusted by the property owner.
After the completed application, some shedding of loose stone is normal and should be expected. Excessive or continuous shedding mandates immediate contact with your Nature Stone® Customer Service Representative.
As with any natural product, Nature Stone® can be affected by exposure to ultra violet light and wearing patterns. Discoloration from UV light will vary depending upon the original Nature Stone® color chosen and the amount of UV exposure. Light colored stones are more affected than dark stones, and are not recommended for outdoor use. Wearing patterns may also affect the Nature Stone® color and light reflectivity. All stones are natural in color; we cannot be responsible for color variations.
Nature Stone® is a hand troweled product, and although every effort is made to ensure a perfect surface, some imperfections such as an occasional upturned pebble or slight trowel mark may occur and should be anticipated.
In certain conditions, white deposits can sometimes appear on your Nature Stone® floor. These deposits can be caused by efflorescent salts present in your concrete substrate, moisture in your substrate, enough pressure to move salts to the surface. We occasionally see this condition on concrete, but it is much more noticeable on a beautiful Nature Stone® surface, even though Nature Stone® is not responsible for the condition. This deposit will commonly disappear with normal weathering.
Following the care and maintenance guidelines should provide you long-lasting durability and beauty for your Nature Stone® floor. The care and maintenance annual inspections are offered at no charge and are strongly recommended. Periodic cleaning and re-glazing/topcoat are recommended to maintain the beauty and integrity of Nature Stone®.
Care and Maintenance Guidelines:
Stay off Nature Stone® (new or re-glazed) until it is completely dry. Exterior stone flooring from Nature Stone® can be hosed down or pressure washed. Do not allow solvents such as paint thinners, Xylene, MEK, caustics, and Muratic Acid to come in contact with Nature Stone®. In case of contact, flush thoroughly with water. Avoid weight exceeding 8,000 pounds per square inch. Interior Nature Stone® such as basements may be cleaned by sweeping, washing, hosing, vacuuming, wet-dry shop vacuuming, floor scrubbing, deep extraction cleaning, or utilizing a carpet cleaning machine as necessary. A light scrubbing with an approved mild degreaser or detergent as necessary is acceptable. Re-glaze Nature Stone® with an approved sealer when shine begins to fade or becomes dull. Clean Nature Stone® thoroughly and allow to dry completely before re-glazing.